AT200E is 4G CAT M1 tracking device, which combined with positioning, monitor, alarm and tracking functions, with small size it’s easy to use and operate, main applies to vehicles and other mobile object location and tracking service, with widely voltage support, it can used in different kinds of vehicles
-Main power cut alarm.
-Build-in GSM/GPS antenna.
-Support GPRS network data transmission.
-Over speed alarm.
-Vehicle mileage statistic.
-Remote Cut/Recover Engine.
-Move alarm(under ACC OFF).
-Remote upgrade by OTA.
-Built in G-sensor
-1 RS232 and 1 RS485 interface for external sensors
-Build-in Bluetooth(support BT Temp sensor)
-5 Digital inputs
-2 Outputs for Cut/Recover Engine
-2 Analog inputs
-1 I2C
-CAN interface reserved
Name | Parameters |
---|---|
AT200E(BG95 CATM1) | Quectel BG95-M3 Cat M1: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85 Cat NB2: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85
GSM/EDGE: 850/900/1800/1900MHz |
GPS module | AT6558D |
Working Voltage | 9V~36V@DC |
Working Current | 5~70mA@12V |
Standby current | 8mA@12V |
Color | Black |
Battery work time | Around 2 hours |
Back-up Battery | 180mAh/4.2V |
Tracker size | 137mm*93mm*40mm |
Tracker weight | 79g |
Working temperature | -20℃ - +75℃ |
Moisture | 5% - 95% |
LED Indicator | Use yellow/blue/red three color LED indicator to show the status of GSM/GPS/power |
Locate sensitivity | 10m |
Locate time | Hot start(average): ≤1s Cold start(average): <30s |
GPS Tracking Sensitivity | -162dbm |
Acquisition sensitivity | -148dbm |
GPS Frequently | L1,1575.42MHz |
Blind area data | 4800 records |
Bluetooth: AC6329C(Optional) -High performance 32-bit RISC CPU -10 GPIO pins -One Full Speed USB OTG controller -Three full-duplex advanced UART(DMA) -Three SPI interface supports host and device mode(DMA) -One IIC interface supports host and device mode -CMOS single-chip fully-integrated radio and baseband -Compliant with Bluetooth -V5.0+BR+EDR+BLE specification -Bluetooth Piconet and Scatternet support -Meet class2 and class3 transmitting power requirement -Support GFSK and π/4 DQPSK all packet types -Provides +8dbm transmitting power -Receiver with -92dBm sensitivity -Support a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap profile |
Get In Touch With Us
Just leave your email or phone number on the contact form so we can provide you with more services!